Service Estimator
What brand is your item?
Select item type
Select item type
Fox Fork Type
Fork Type
Rear Shock Type
Rear Shock Type
Level 1
32mm Lowers Service
$179.00
<50 hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil.
Nitrogen charge air spring, general function test on hand dyno.
Level 2
32mm Lowers & Air Spring Service
$229.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals. Assess damper condition, clean and test for proper function. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 3
32mm Lowers, Air Spring & Damper Service
$299.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals. Remove damper and rebuild with new bladder, seals, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 4
32mm Lowers, Air Spring, Damper & Bushings Service
$369.00
125+ hrs
Condition inspection, remove air spring assembly, then replace air seals. Remove damper and rebuild with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. Open new bushings appropriately to suit stanchions. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 5
32mm Lowers, Air Spring, Damper, Bushings & CSU Service
$759.00
200+ hrs
Condition inspection, remove air spring and damper. Rebuild damper with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. Open new bushings appropriately to suit stanchions. Replace and install new Crown Steerer Unit (CSU) and re-install air spring with new seals and serviced damper. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
34mm Lowers Service
$179.00
<50 hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge, general function test on hand dyno.
Level 2
34mm Lowers & Air Spring Service
$239.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Assess damper condition, clean and test for proper function. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 3
34mm Lowers, Air Spring & Damper Service
$299.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper remove and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 4
34mm Lowers, Air Spring, Damper & Bushings Service
$389.00
125+ hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper remove and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. 'open' new bushings appropriately to suit stanchions. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 5
34mm Lowers, Air Spring, Damper, Bushings & CSU Service
$799.00
>200+ hrs
Condition inspection, remove air spring assembly, and damper. Damper rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. 'open' new bushings appropriately. Replacement and install of new Crown Steerer Unit (CSU), and re-install air spring with new seals, and serviced damper. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
36mm Lowers Service
$179
<50 hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, general function test on hand dyno.
Level 2
36mm Lowers & Air Spring Service
$239
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals. Assess damper condition, clean and test for proper function. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 3
36mm Lowers, Air Spring & Damper Service
$299
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals. Remove damper and rebuild with new bladder, seals, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 4
36mm Lowers, Air Spring, Damper & Bushings Service
$399
125+ hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper remove and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. 'open' new bushings appropriately to suit stanchions. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 5
36mm Lowers, Air Spring, Damper, Bushings & CSU Service
$799
200+ hrs
Condition inspection, remove air spring assembly, and damper. Damper rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. 'open' new bushings appropriately. Replacement and install of new Crown Steerer Unit (CSU), and re-install air spring with new seals, and serviced damper. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
38mm Lowers Service
$179.00
<50 hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, general function test on hand dyno.
Level 2
38mm Lowers & Air Spring Service
$239.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals. Assess damper condition, clean and test for proper function. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 3
38mm Lowers, Air Spring & Damper Service
$299.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals. Remove damper and rebuild with new bladder, seals, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 4
38mm Lowers, Air Spring, Damper & Bushings Service
$399.00
125+ hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper remove and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. 'open' new bushings appropriately to suit stanchions. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 5
38mm Lowers, Air Spring, Damper, Bushings & CSU Service
$819.00
200+ hrs
Condition inspection, remove air spring assembly, and damper. Damper rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, remove bushings and replace all 4. 'open' new bushings appropriately. Replacement and install of new Crown Steerer Unit (CSU), and re-install air spring with new seals, and serviced damper. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
$50 price reduction for Anodised Black CSU replacement
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
40mm Lowers Service
$199
<50 hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge, general function test on hand dyno.
Level 2
40mm Lowers & Air Spring Service
$259.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Assess damper condition, clean and test for proper function. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Older 'Coil' Fox 40 - Remove $30 from estimate.
Level 3
40mm Lowers, Air Spring and Damper Service
$309.00
50-125 hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper removed and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Older 'Coil' Fox 40 - Remove $30 from estimate.
Level 4
40mm Lowers, Air Spring, Damper and Bushing Service
$409.00
125+ hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper removed and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, Remove bushings and replace. Assess new bushings for appropriate tension and dry hone accordingly. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Older 'Coil' Fox 40 - Remove $30 from estimate.
Level 5
40mm Lowers, Air Spring, Damper, Bushing & Upper Tube (replacement) Service
$859.00
200+ hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Damper removed and rebuilt with new bladder, seals, and fluids. Clean lower leg assembly, Remove bushings and replace all 4. Assess new bushings for appropriate tension and dry hone accordingly. Install 2 x new upper tubes as required. Replace dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Older 'Coil' Fox 40 - Remove $30 from estimate.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Lowers Service 32mm
$159.00
<50
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, general function test on hand dyno.
Level 2
50-150Hr All 32mm models
$179.00
50-150 hrs
Condition inspection, remove air spring assembly, then replace air seals. Installation of genuine 50 Hour service kit and fresh fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 3
200+ hours 32mm models
$209.00
200+ hrs
Condition inspection, remove air spring assembly, then replace air seals. Installation of genuine 200 Hour service kit with new seals throughout rebound and compression assemblies and fresh fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 4
200+ hours 32mm models with Charger damper
$249.00
200+ hrs w/ Charger Damper
Condition inspection, remove air spring assembly, then replace air seals. Remove damper and rebuild with new bladder, seals, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Lowers Service 35mm
$169.00
<50
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace with new SKF dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 2
50-150Hr All 35mm models
$199.00
50-150 hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals with updated version, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 3
200+ hours 35mm models
$219
200+ hrs
Condition inspection, remove air spring assembly, then replace air seals. Installation of genuine service kit with new seals throughout rebound and compression assemblies and bleed with fresh fluids. Clean lower leg assembly, assess bushings for appropriate tension. Install genuine dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno.
Level 4
200+ hours 35mm models with Charger damper
$249
200+ hrs w/ Charger Damper
Condition inspection, remove air spring assembly, then replace air seals. Installation of genuine service kit with new seals, seal heads and bladder unit throughout charger damper unit. Re-bleed of charger damper with appropriate fluids. Clean lower leg assembly, assess bushings for appropriate tension. Install genuine dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno. +$50 for Charger3/3.1 models
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Lowers Service ZEB
$179.00
<50hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace with new SKF dust seals, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 2
50-150Hr ZEB models
$209.00
50-150 hrs
Condition inspection, remove air spring assembly, then replace air seals as needed. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals with updated version, foam rings, and bath oil. Nitrogen charge, test for pressure loss and final function test on hand dyno.
Level 3
200+ hours ZEB with Charger damper
$279.00
200+ hrs
Condition inspection, remove air spring assembly, then replace air seals. Installation of genuine service kit with new seals, seal heads, throughout charger damper unit. Re-bleed of charger damper with appropriate fluids. Clean lower leg assembly, assess bushings for appropriate tension. Install genuine dust seals, foam rings, and bath oil. Nitrogen charge air spring, test for pressure loss and final function test on hand dyno. +$50 for Charger3/3.1 models
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Lowers Service BOXXER
$179.00
<50hrs
Condition inspection, clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals with updated version, foam rings, and bath oil. General function test on hand dyno.
Level 2
50-150Hr All BOXXER 35mm models
$199.00
50-150 hrs
Condition inspection, remove spring assembly, replace consumables and regrease. New seals throughout rebound assembly and compression unit and rebuilt with fresh fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals with updated version, foam rings, and bath oil. Tested spring function and final function test on hand dyno.
Level 3
200+ hours Open Bath BOXXER 35mm models
$239
200+ hrs
Condition inspection, remove spring assembly, replace consumables and regrease. Damper remove and rebuilt with new bladder, updated seal heads, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals with updated version, foam rings, and bath oil. Tested spring function and final function test on hand dyno.
Level 4
200+ hours BOXXER 35mm models with Charger damper
$289.00
200+ hrs w/ Charger Damper
Condition inspection, remove spring assembly, replace consumables and regrease. Damper remove and rebuilt with new bladder, updated seal heads, and fluids. Clean lower leg assembly, assess bushings for appropriate tension. Replace dust seals with updated version, foam rings, and bath oil. Tested spring function and final function test on hand dyno.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Booted Lefty Service
$249.00
<100
Condition inspection, clean telescope assembly, set to full travel and re-grease. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 2
Booted Lefty Service
$389.00
200+ hrs
Condition inspection, clean telescope assembly, deconstruct and rebuild with new races, needle bearings and boot. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Hybrid Lefty 1.0 Service
$259.00
<100 hrs
Condition inspection, clean telescope assembly, flush old fluids and replace bath lube. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 2
Hybrid Lefty 1.0 Service
$399.00
200+ hrs
Condition inspection, clean telescope assembly, deconstruct and rebuild with new races, needle bearings, collar and seal head. Inspect lower leg condition. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Hybrid Lefty 2.0 Service
$259.00
<100 hrs
Condition inspection, clean telescope assembly, flush old fluids and replace bath lube. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 2
Hybrid Lefty 2.0 Service
$399.00
200+ hrs
Condition inspection, clean telescope assembly, deconstruct and rebuild with new races, needle bearings, collar and seal head. Inspect lower leg condition. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 3
Hybrid Lefty 2.0 32mm Service
$589.00
As required
Condition inspection, clean telescope assembly, deconstruct and rebuild with new lower leg, races, needle bearings, collar and seal head. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 4
Hybrid Lefty 2.0 Supermax 36mm Service
$689.00
As required
Condition inspection, clean telescope assembly, deconstruct and rebuild with new lower leg, races, needle bearings, collar and seal head. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Lefty Ocho Service
$289.00
<100 hrs
Condition inspection, remove, clean and inspect chamber damper. Clean telescope assembly, deconstruct and replacement of dust wiper seal, telescope bushing, re-grease and set to full travel. Rebuild of air spring assembly with all new air seals, nitrogen charge, function and pressure loss test.
Level 2
Lefty Ocho Service
$399.00
200+ hrs
Condition inspection, remove, clean and rebuild chamber damper with fresh seals and fluids. Clean telescope assembly, deconstruct and replace dust wiper seal, telescope bushing, bearing races and delta bearing cage. Re-grease and set to full travel. Rebuild of air spring assembly with all new air seals, nitrogen charge, function and pressure loss test.
Level 3
Lefty Ocho Service
$699.00
As required
Condition inspection, remove, clean and rebuild chamber damper with fresh seals and fluids. Clean telescope assembly, deconstruct and replace lower leg assembly, fresh dust wiper seal, telescope bushing, bearing races and delta bearing cage. Re-grease and set to full travel. Rebuild of air spring assembly with all new air seals, nitrogen charge, function and pressure loss test.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Level 1
Headshok DL50/DL80 Service
$249.00
<100 hrs
Condition inspection, clean telescope assembly, reset to full travel and re-grease. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 2
Headshok DL50/DL80
$299.00
200+ hrs
Condition inspection, clean telescope assembly, deconstruct and rebuild with new races, needle bearings, boot replace if needed. Rebuild damper with new seals and fluids. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Level 3
Headshok DL50/DL80/DLR80
$419.00
As required
Condition inspection, clean telescope assembly, reset to full travel and re-grease. Replace damper as needed with updated version. Rebuild air spring assembly with new seals, nitrogen charge, function and pressure loss test.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Fox FLOAT (Inline) Full Service
$209.00
Condition inspection and hand dyno test prior to full disassembly. Deconstruct damper assembly, rebuild with all new genuine seals and fluids throughout, nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Note: Some proprietary inline Fox air shocks (e.g. Scott Nude, Trek DRCV, and Trek Thru shaft) may be subject to a small $30 surcharge due to additional service kits and procedures necessary.
Fox FLOAT (with Reservoir) Full Service
$229.00
Condition inspection and hand dyno test prior to full disassembly. Deconstruct damper assembly, rebuild with all new genuine seals and fluids throughout, nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Includes all Fox Air shocks with the external reservoir. For example: Fox Float X, Float X2, DHX Air, DPX2, etc
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Fox FLOAT Specialized Brain Full Service
$299.00
Condition inspection, deconstruct damper and inertia valve (brain) assembly. Rebuild with all new genuine seals throughout, vacuum bleed with genuine fluids, set and nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Fox/Cannondale DYAD Full Service
$299.00
Condition inspection, deconstruct dual damper assemblies, rebuild with all new genuine seals throughout, vacuum bleed and nitrogen charge twin IFP’s, install new air seals throughout, nitrogen charge positive and negative air cans and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Fox Coil Shock Full Service
$229.00
Condition inspection, deconstruct damper assembly, rebuild with all new genuine seals throughout, Vacuum bleed with genuine fluids, reset and nitrogen charge IFP, and full function test on dyno. Install new eyelet bushings.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Fox Trek IsoStrut Full Service
$269.00
Condition inspection of IsoStrut and hand dyno test prior to full disassembly. Deconstruct damper assembly, rebuild with all new genuine seals and fluids throughout, nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Test for pressure loss. Note - Carriage wiper seal and bushing are Trek parts, and not replaced in the Fox shock service as above.
See manual for more info.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
RockShox Monarch/Deluxe/Luxe Full Service
$209.00
Condition inspection, deconstruct damper assembly, rebuild with all new seals throughout, reset and nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
RS Monarch Plus/Super Deluxe Full Service
$239
Condition inspection, deconstruct damper assembly, rebuild with all new seals throughout, reset and nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
RockShox Vivid Air Full Service
$259.00
Condition inspection, deconstruct damper assembly, rebuild with all new seals throughout, reset and nitrogen charge IFP, install new air seals throughout, nitrogen charge air can and full function test on dyno. Install new eyelet bushings. Test for pressure loss.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
RockShox Coil Shock Full Service
$229.00
Condition inspection, deconstruct damper assembly, rebuild with all new seals throughout, reset and nitrogen charge IFP, and full function test on dyno. Install new eyelet bushings.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.
Fox Transfer Seatpost Full Service
$229.00
Condition inspection, deconstruct internal assembly and rebuild with all new seals, piston, glide rings and fluids. Nitrogen charge IFP to factory specifications. Install new keyways, telescope bushings and main dust seal. Function test.
Price includes FREE Express Postage both ways!
Prices listed include parts, subject to the item's condition. Contact us for more information if required.